Difference between revisions of "Elmiskop II"
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:Siemens - Elmiskop II - overview.jpg|thumb|Overview of the Column and Vacuum pumping system]] | [[File:Siemens - Elmiskop II - overview.jpg|thumb|Overview of the Column and Vacuum pumping system]] | ||
| − | The Elmiskop II was a medium end Electron microscope manufactured by the [[siemens|Siemens Corporation]]. It was somewhat based on both the design and technology of the [[Elmiskop I]] which proceeded it. | + | The Elmiskop II was a medium end Electron microscope manufactured by the [[siemens|Siemens Corporation]]. It was somewhat based on both the design and technology of the [[elmiskop 1|Elmiskop I]] which proceeded it. |
Unlike the aforementioned Elmiskop I, the Elmiskop II was a much simpler, and thus much less costly machine. Instead of the Elmiskop I's 5 Electromagnetic lenses, it only Featured 2, namely the Objective and a Projective lense furnished with a pol piece revolver. This revolver allowed the microscope to change magnification in the absence of an intermediate lens, as is featured in almost all microscopes fallowing the [[ÜM100]]. The illumination system consisted merely of a simple triode Electron gun similar in design to that of the Elmiskop I. Much like that of the Elmiskop I, it also featured full adjustments and mechanical beam tilt, however it lacked the Stigmator seen in its bigger brother. | Unlike the aforementioned Elmiskop I, the Elmiskop II was a much simpler, and thus much less costly machine. Instead of the Elmiskop I's 5 Electromagnetic lenses, it only Featured 2, namely the Objective and a Projective lense furnished with a pol piece revolver. This revolver allowed the microscope to change magnification in the absence of an intermediate lens, as is featured in almost all microscopes fallowing the [[ÜM100]]. The illumination system consisted merely of a simple triode Electron gun similar in design to that of the Elmiskop I. Much like that of the Elmiskop I, it also featured full adjustments and mechanical beam tilt, however it lacked the Stigmator seen in its bigger brother. | ||
| Line 7: | Line 7: | ||
== History == | == History == | ||
| − | The Elmiskop II started as a project by [[Ernst Ruska]] and [[K. Müller]] to develop a more economical alternative to the [[Elmiskop I]], yet allowing, much like microscopes preceeding it, to use at least some accesories of its predecesors and or brothers. It also used the tried and true vacuum system found within the [[Elmiskop I]] as well as a good deal of its castings, thus lowering production cost. | + | The Elmiskop II started as a project by [[Ernst Ruska]] and [[K. Müller]] to develop a more economical alternative to the [[elmiskop 1|Elmiskop I]], yet allowing, much like microscopes preceeding it, to use at least some accesories of its predecesors and or brothers. It also used the tried and true vacuum system found within the [[elmiskop 1|Elmiskop I]] as well as a good deal of its castings, thus lowering production cost. |
First mentions of an Electron Microscope fitting the description of the Elmiskop II where first seen in the paper tittled: "Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*)<ref> K. Müller & E. Ruska, Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*), 1954</ref>, where it was not reffered to by name as the Elmiskop II, but its technical design was very similar, thus leading to the conclusion that it was later developed into what is now known as the Elmiskop II. | First mentions of an Electron Microscope fitting the description of the Elmiskop II where first seen in the paper tittled: "Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*)<ref> K. Müller & E. Ruska, Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*), 1954</ref>, where it was not reffered to by name as the Elmiskop II, but its technical design was very similar, thus leading to the conclusion that it was later developed into what is now known as the Elmiskop II. | ||
| Line 18: | Line 18: | ||
{{#tree: | {{#tree: | ||
*Manual | *Manual | ||
| + | **{"icon":false}{{#l:Siemens - Elmiskop II - Bedienungsanleitung - Bild Teil.pdf|Bild Teil}} | ||
*Promotional | *Promotional | ||
**{"icon":false}{{#l:Siemens - Elmiskop II - Brochure - compressed.pdf|Marketing Brochure}} | **{"icon":false}{{#l:Siemens - Elmiskop II - Brochure - compressed.pdf|Marketing Brochure}} | ||
| Line 27: | Line 28: | ||
***{"icon":false}{{#l:Siemens - Einrichtung für Innenkinematographie zum Elmiskop 1, 1A und Elmisop II - comp.pdf|Einrichtung für Innenkinematographie Brochure}} | ***{"icon":false}{{#l:Siemens - Einrichtung für Innenkinematographie zum Elmiskop 1, 1A und Elmisop II - comp.pdf|Einrichtung für Innenkinematographie Brochure}} | ||
***{"icon":false}{{#l:Siemens - 70-mm.Filmkasette für das Elmiskop 1A, 1 und II - comp.pdf|70-mm.Filmkasette Brochure}} | ***{"icon":false}{{#l:Siemens - 70-mm.Filmkasette für das Elmiskop 1A, 1 und II - comp.pdf|70-mm.Filmkasette Brochure}} | ||
| + | *Schematics | ||
| + | **{"icon":false}{{#l:Siemens - Elmiskop II - High Voltage Power supply.jpg|High Voltage Powersupply}} | ||
| + | **{"icon":false}{{#l:Siemens - Elmiskop II - Lens power supply.jpg|Lens Powersupply}} | ||
}} | }} | ||
[[Category:Siemens]] | [[Category:Siemens]] | ||
Latest revision as of 20:34, 19 September 2021
The Elmiskop II was a medium end Electron microscope manufactured by the Siemens Corporation. It was somewhat based on both the design and technology of the Elmiskop I which proceeded it.
Unlike the aforementioned Elmiskop I, the Elmiskop II was a much simpler, and thus much less costly machine. Instead of the Elmiskop I's 5 Electromagnetic lenses, it only Featured 2, namely the Objective and a Projective lense furnished with a pol piece revolver. This revolver allowed the microscope to change magnification in the absence of an intermediate lens, as is featured in almost all microscopes fallowing the ÜM100. The illumination system consisted merely of a simple triode Electron gun similar in design to that of the Elmiskop I. Much like that of the Elmiskop I, it also featured full adjustments and mechanical beam tilt, however it lacked the Stigmator seen in its bigger brother.
History
The Elmiskop II started as a project by Ernst Ruska and K. Müller to develop a more economical alternative to the Elmiskop I, yet allowing, much like microscopes preceeding it, to use at least some accesories of its predecesors and or brothers. It also used the tried and true vacuum system found within the Elmiskop I as well as a good deal of its castings, thus lowering production cost.
First mentions of an Electron Microscope fitting the description of the Elmiskop II where first seen in the paper tittled: "Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*)[1], where it was not reffered to by name as the Elmiskop II, but its technical design was very similar, thus leading to the conclusion that it was later developed into what is now known as the Elmiskop II.
System Description
<add system description later>
Documentation
- ↑ K. Müller & E. Ruska, Ein vereinfachtest Elektromagnetisches Durschstahlungsmikroskop für Elektronen von 40 bis 60KV*), 1954